Una revisión del impacto de la adopción de la metodología Lean Construction en los proyectos de construcción

review of the impact of the adoption of lean construction methodology in construction projects

Contenido principal del artículo

Resumen

Lean Construction es un sistema de métodos innovadores de gestión de procesos en la construcción, puesto que es una herramienta eficaz para optimizar los resultados del trabajo: el tiempo y el costo del trabajo se reducen al mejorar constantemente la eficacia del producto final. La finalidad de este documento es evaluar de manera sistemática la adopción de la metodología Lean Contruction en proyectos de construcción. Se realizó un análisis cualitativo mediante el cual se revisaron 80 documentos indexados entre los años 2017 y 2021, distribuido de la siguiente manera: 61 artículos son de Scopus, 17 de ScienceDirect y 2 de Ebsco. En conclusión, la metodología Lean Construction en proyectos de construcción muestra que es un enfoque sistémico que sirve para satisfacer las expectativas del cliente, maximizando el valor añadido y reduciendo todas las formas de desperdicio, así como también aporta mucho a las construcciones optimizando el proceso productivo a nivel estratégico y gestión operativo

Palabras clave:

Descargas

Los datos de descargas todavía no están disponibles.

Detalles del artículo

Biografía del autor/a (VER)

Dr. Sócrates Muñoz, Universidad Señor de Sipan

Ingeniero Civil egresado de la Universidad Nacional Pedro Ruiz Gallo Lambayeque en el año 2006, con 11 años de experiencia en ejecución de obras civiles y producción de pre fabricados y pretensados y 8 años de colegiado, con grado de Magister en Ciencias de la Tierra con Mención en Geotecnia egresado de la Universidad Nacional de San Agustín Arequipa, con un Diplomado en Especialización Geología Aplicada en Minería por en la Cámara Minera del Perú. Mis valores primordiales son la lealtad, responsabilidad, compañerismo, la puntualidad y el deseo de superación. Ex Docente de pre grado en los cursos de Mecánica de Suelos, Mecánica de Fluidos, Geología en las Universidad Catolica San Pablo, Universidad Nestor Caceres Velasquez, Universidad Alas Peruanas, Ex Docente de Post Grado de la Universidad Nestor Caceres Velasquez del curso de Mecanica de Suelos y Rocas, Profesor de la Universidad Señor de Sipán

Sr. Nelson Gomez, Universidad Señor de Sipan

Estudiante de Ingeniería Civil

Sr. Jorge Ticona, Universidad Señor de Sipan

Estudiante de Ingeniería Civil

Referencias (VER)

W. Albalkhy, R. Sweis and Z. Lafhaj, "Barriers to adopting lean construction in the construction industry—the case of jordan," Buildings, vol. 11, no. 6, pp. 1-17, 2021.

F. Mellado and E. Lou, "Building information modelling, lean and sustainability: An integration framework to promote performance improvements in the construction industry," Sustainable Cities and Society, vol. 61, no. 20, pp. 1-57, 2020.

G. A. Araque González, D. A. García Arango, E. D. Aguirre Mesa, C. F. Henao Villa, C. Echeverry Gutiérrez y S. Sidek, «The Planning in Lean Construction Methodology At Colombian Civil Sector,» International Journal of Recent Technology and Engineering, vol. 8, nº 1, pp. 1-6, 2019.

M. S. Bajjou, A. Chafi, A. Ennadi and M. El Hammoumi, "The practical relationships between lean construction tools and sustainable development: A literature review," Journal of Engineering Science and Technology Review, vol. 10, no. 4, pp. 170-177, 2017.

C. S. Kumar, C. B. Kapuganti, S. Eswara Rao, T. Santhosh Kumar y B. Ramesh, «Application of last planner system as lean construction technique,» International Journal of Emerging Trends in Engineering Research, vol. 8, nº 9, pp. 6035 - 6041, 2020.

S. Singh and K. Kumar, "Review of literature of lean construction and lean tools using systematic literature review technique (2008–2018)," Ain Shams Engineering Journal, vol. 11, no. 2, pp. 465-471, 2020.

U. H. Issa and M. Alqurashi, "A model for evaluating causes of wastes and lean implementation in construction projects," Journal of Civil Engineering and Management, vol. 16, no. 4, pp. 331 - 342, 2020.

E. I. Daniel and C. Pasquire, "Creating social value within the delivery of construction projects: the role of lean approach," Engineering, Construction and Architectural Management, vol. 26, no. 6, pp. 1105 - 1128, 2019.

M. Darabseh, "Lean applications in construction: Review article," U.Porto Journal of Engineering, vol. 5, no. 2, pp. 29 - 37, 2019.

P. V. Ramani and L. K. Ksd, "Application of lean in construction using value stream mapping," Engineering, Construction and Architectural Management, vol. 28, no. 1, pp. 216 - 228, 2021.

A. Mughees, Z. Gao and G. Smith, "Exploring factors for implementing lean construction for rapid initial successes in construction," Journal of Cleaner Production, vol. 277, 2020.

I. Katar, "Enhancing the project delivery quality; lean construction concepts of design-build & design-bid-build methods," International Journal of Management, vol. 10, no. 6, pp. 324 - 337, 2019.

M. Goh and Y. M. Goh, "Lean production theory-based simulation of modular construction processes," Automation in Construction, vol. 101, pp. 227 - 244, 2019.

S. Demirkesen and H. G. Bayhan, "Critical Success Factors of Lean Implementation in the Construction Industry," IEEE Transactions on Engineering Management, 2019.

X. Xianhai Meng, «Lean management in the context of construction supply chains,» International Journal of Production Research, vol. 57, nº 11, pp. 3784 - 3798, 2019.

S. Eman , "The impact of adopting lean construction in Egypt: Level of knowledge, application, and benefits," Ain Shams Engineering Journal, 2021.

S. Fawzia, J. G. Sarhan, B. Xia, A. Karim, A. O. Olanipekun and V. W. Coffey, "Framework for the implementation of lean construction strategies using the interpretive structural modelling (ISM) technique: A case of the Saudi construction industry," Engineering, Construction and Architectural Management, vol. 27, no. 1, pp. 1-23, 2020.

M. D. Andújar Montoya, A. Galiano Garrigós, V. Echarri Iribarren and C. Rizo Maestre, "BIM-LEAN as a methodology to save execution costs in building construction-An experience under the spanish framework," Applied Sciences (Switzerland), vol. 10, no. 6, p. 1913, 2020.

M. S. Bajjou, A. Chafi, A. En-Nadi and M. M. El Hammoumi, "The practical relationships between lean construction tools and sustainable development: A literature review," Journal of Engineering Science and Technology Review, vol. 10, no. 4, pp. 170-177, 2017.

J. Zhang, H. Li, H. Golizadeh, C. Zhao, S. Lyu and R. Jin, "Reliability evaluation index for the integrated supply chain utilising BIM and lean approaches," Engineering, Construction and Architectural Management, vol. 27, no. 5, pp. 997-1038, 2020.

U. H. Issa and M. Alqurashi, "A model for evaluating causes of wastes and lean implementation in construction projects," Journal of Civil Engineering and Management, vol. 26, no. 4, pp. 331-342, 2020.

. Y. G. Nilay and S. Kaan, "Sequential SWARA and fuzzy VIKOR methods in elimination of waste and creation of lean construction processes," Journal of Building Engineering, vol. 44, p. 103196, 2021.

J. Watkins and B. P. Sunjka, "Combining green building and lean construction to achieve more sustainable development in south africa," South African Journal of Industrial Engineering, vol. 31, no. 3, pp. 133-143, 2020.

A. Tezel, M. Taggart, L. Koskela, P. Tzortzopoulos, J. Hanahoe and M. Kelly, "Lean construction and BIM in small and medium-sized enterprises (SMEs) in construction: A systematic literature review," Canadian Journal of Civil Engineering, vol. 47, no. 2, pp. 186-201, 2020.

U. Latorre A., C. Sanz and B. Sánchez, "Application of lean-BIM model to improve design building phase's productivity," Informes de la Construccion, vol. 71, no. 556, pp. 1-9, 2019.

T. Moyo and B. Chigara, "Barriers to lean construction implementation in Zimbabwe," Journal of Engineering, Design and Technology, 2021.

L. Koskela, A. Ferrantelli, J. Niiranen, E. Pikas and B. Dave, "Epistemological Explanation of Lean Construction," Journal of Construction Engineering and Management - ASCE, vol. 145, no. 2, pp. 1-10, 2019.

R. Barathwaj, R. V. Singh and G. I. Gunarani, "Lean construction: Value Stream Mapping for residentials construction," International Journal of Civil Engineering and Technology, vol. 8, no. 5, pp. 1072-1086, 2017.

A. Naser and M. Gunduz, "Value Stream Mapping as a Lean Tool for Construction Projects," International Journal of Structural and Civil Engineering, vol. 8, no. 1, 2019.

M. A. Marhani, N. A. A. Bari, K. Ahmad and A. R. Jaapar, "The implementation of lean construction tools in Malaysia," Chemical Engineering Transactions, vol. 63, pp. 289-294, 2018.

C. P. Schimanski, N. L. Pradhan, D. Chaltsev, G. Pasetti Monizza and D. T. Matt, "Integrating BIM with Lean Construction approach: Functional requirements and production management software," Automation in Construction, vol. 132, 2021.

Y. I. Abu Aisheh, B. A. Tayeh, W. S. Alaloul and A. Almalki, "Health and safety improvement in construction projects: a lean construction approach," International Journal of Occupational Safety and, pp. 1-13, 2021.

S. Demirkesen, "Measuring impact of Lean implementation on construction safety performance: a structural equation model," Production Planning and Control, vol. 31, no. 5, pp. 412-433, 2020.

P. Dallasega, A. Revolti, P. C. Sauer, F. Schulze and E. Rauch, "BIM, augmented and virtual reality empowering lean construction management: A project simulation game," Procedia Manufacturing, vol. 45, pp. 49-54, 2020.

S. Singh and K. Kumar, "A study of lean construction and visual management tools through cluster analysi," Ain Shams Engineering Journal, vol. 12, no. 1, pp. 1153-1162, 2021.

M. S. Bajjou and A. Chafi, "Lean construction and simulation for performance improvement: a case study of reinforcement process," International Journal of Productivity and Performance Management, vol. 70, no. 2, pp. 459-487, 2021.

A. Tezel, L. Koskela and Z. Aziz, "Current condition and future directions for lean construction in highways projects: A small and medium-sized enterprises (SMEs) perspective," International Journal of Project Management, vol. 36, no. 2, pp. 267-286, 2018.

Z. Yuan, Z. Zhang, G. Ni, C. Chen, W. Wang and J. Hong, "Cause Analysis of Hindering On-Site Lean Construction for Prefabricated Buildings and Corresponding Organizational Capability Evaluation," Advances in Civil Engineering, vol. 2020, pp. 1-16, 2020.

S. Ahmed and H. R. Sobuz, "Challenges of implementing lean construction in the construction industry in Bangladesh," Smart and Sustainable Built Environment, vol. 9, no. 2, pp. 174-207, 2020.

A. A. Enshassi, N. Saleh and S. Mohamed, "Barriers to the application of lean construction techniques concerning safety improvement in construction projects," International Journal of Construction Management, vol. 21, no. 10, pp. 1044-1060, 2021.

W. Albalkhy and R. J. Sweis, "Assessing lean construction conformance amongst the second-grade Jordanian construction contractors," International Journal of Construction Management, pp. 1-13, 2019.

M. M. Marzouk and A. Elmaraghy, "Design for deconstruction using integrated lean principles and bim approach," Sustainability (Switzerland), vol. 13, no. 14, p. 7856, 2021.

E. Amr and E.-a. Islam, "Holistic Study and Analysis of Factors Affecting Collaborative Planning in Construction," Journal of Construction Engineering and Management, vol. 147, no. 4, 2021.

S. Ahmed, M. M. Hossain and I. Haq, "Implementation of lean construction in the construction industry in Bangladesh: awareness, benefits and challenges," International Journal of Building Pathology and Adaptation, vol. 39, no. 2, pp. 368-406, 2021.

F. Muñoz-La Rivera, J. Mora-Serrano, I. Valero and E. Oñate, "Methodological-Technological Framework for Construction 4.0," Archives of Computational Methods in Engineering, vol. 28, no. 2, pp. 689-711, 2021.

O. Babalola, E. O. Ibem and I. C. Ezema, "Implementation of lean practices in the construction industry: A systematic review," Building and Environment, vol. 148, pp. 34-43, 2019.

K. Radman, J. Mostafa Babaeian, G. Eghbal and W. Suzanne, "Causes of Delay in Smart and Complex Construction Projects," Journal of Legal Affairs and Dispute Resolution in Engineering and Construction, vol. 13, no. 4, 2021.

. E. P. Small, K. Al Hamouri and H. Al Hamouri, "Examination of Opportunities for Integration of Lean Principles in Construction in Dubai," Procedia Engineering, vol. 196, pp. 616-621, 2017.

M. D. Andújar Montoya, A. Galiano Garrigós, V. Echarri Iribarren and C. Rizo Maestre, "BIM-LEAN as a methodology to save execution costs in building construction-An experience under the spanish framework," Applied Sciences (Switzerland), vol. 10, no. 6, 2020.

C. Patrone, M. M. Kozlova, M. Brenta, F. Filauro, D. Campanella, A. Ribatti, E. Scuderi, T. Marini, G. Galli and R. Revetria, "Hospital warehouse management during the construction of a new building through lean techniques," Advances in Science, Technology and Engineering Systems, vol. 5, no. 1, pp. 256-262, 2020.

D. Heigermoser, B. García de Soto, E. L. S. Abbott and D. K. Chua, "BIM-based Last Planner System tool for improving construction project management," Automation in Construction, vol. 104, pp. 246-254, 2019.

C. Toca Pérez and D. Costa, "Developing a taxonomy of transportation waste in construction production processes," Built Environment Project and Asset Management, vol. 8, no. 5, pp. 434-448, 2018.

F. Bamana, N. Lehoux and C. Cloutier, "Simulation of a Construction Project:," Assessing Impact of Just-in-Time and Lean Principles, vol. 145, no. 5, 2019.

J. Shurrab and M. Hussain, "An empirical study of the impact of lean on the performance," Journal of Engineering, Design and Technology, 2018.

""Exploring the BIM and lean synergies in the Istanbul Grand Airport construction project," Engineering, Construction and Architectural Managemen, vol. 25, no. 10, pp. 1339-1354, 2018.

J. M. Savolainen, A. Saari, A. Männistö and K. Kähkonen, "Indicators of collaborative design management in construction projects," Journal of Engineering, Design and Technology, vol. 16, no. 4, pp. 674-691, 2018.

M. Saad Bajjou and A. Chafi, "Lean construction implementation in the Moroccan construction industry: Awareness, benefits and barriers," Journal of Engineering Design and Technology, vol. 24, no. 4, pp. 533-556, 2018.

X. Zhang, S. Azhar, A. Nadeem and M. Khalfan, "Using Building Information Modelling to achieve Lean principles by improving efficiency of work teams," International Journal of Construction Management, vol. 18, no. 4, pp. 293-300, 2017.

T. Castillo, L. F. Alarcón Cárdenas and J. L. Salvatierra Garrido, "Effects of Last Planner System Practices on Social Networks and the Performance of Construction Projects," Journal of Construction Engineering and Management, vol. 144, no. 3, pp. 1-13, 2018.

P. Saieg, E. Sotelino, D. Nascimento and R. Caiado, "Interactions of Building Information Modeling, Lean and Sustainability on the Architectural, Engineering and Construction industry: A systematic review," Journal of Cleaner Production, vol. 174, pp. 788-806, 2018.

T.Subramani and A.Prabhu, "Material Procurement in Construction Industry Problems and Solutions," International Journal of Engineering & Technology, vol. 7, no. 3.10, pp. 31-35, 2018.

Z. Dakhli and Z. Lafhaj, "Efficient logistics enabled by smart solutions in tunneling," Underground Space, vol. 2, no. 4, pp. 227-233, 2017.

D. D. Viana, I. D. Tommelein and C. T. Formoso, "Using Modularity to Reduce Complexity of Industrialized Building Systems for Mass Customization," Energies, vol. 10, no. 10, p. 1622, 2017.

F. Hamzeh, C. Theokaris, C. Rouhana and Y. Abbas, "Application of hands-on simulation games to improve classroom experience," European Journal of Engineering Education, vol. 42, no. 5, pp. 471-481, 2016.

D. K. Sharma and H. K. Gupta, "Planning and design of environmentally sustainable thana-plaun hydroelectric project on beas river in India," Water and Energy International, vol. 60, no. 4, pp. 36-43, 2017.

A. Islam and S. K. Guchhait, "Search for social justice for the victims of erosion hazard along the banks of river Bhagirathi by hydraulic control: a case study of West Bengal, India," Environment, Development and Sustainability, vol. 19, no. 2, pp. 433-459, 2017.

H. Erol, I. Dikmen and M. T. Birgönül, "Measuring the impact of lean construction practices on project duration and variability: A simulation-based study on residential buildings," Journal of Civil Engineering and Management, vol. 23, no. 2, pp. 241-251, 2017.

S. Deep, M. B. Khan, S. Ahmad and A. Saeed, "A study of various factors affecting contractor's performance in lowest bid award construction projects," International Journal of Civil Engineering and Technology, vol. 8, no. 2, pp. 28-33, 2017.

M. Asim, S. Deep and S. A. Ahmad, "Time impact study of real estate sector construction projects post application of lean principles for delay resolutions," International Journal of Civil Engineering and Technology, vol. 8, no. 2, pp. 89-99, 2017.

H. Golzarpoor, V. González, M. Shahbazpour and M. O'Sullivan, "An input-output simulation model for assessing production and environmental waste in construction," vol. 143, pp. 1094-1104, 2017.

Z. Dakhli, Z. Lafha and M. Bernard, "Application of lean to the bidding phase in building construction: A French contractor’s experience," International Journal of Lean Six Sigma, vol. 8, no. 2, 2017.

M. J. Maraqa, R. Sacks and S. Spatari, "Quantitative assessment of the impacts of BIM and lean on process and operations flow in construction projects," Engineering, Construction and Architectural Management, vol. 28, no. 8, pp. 22176-2198, 2021.

S. Wandahl, C. T. Pérez, S. Salling, H. H. Neve, J. Lerche and S. Petersen, "The impact of construction labour productivity on the renovation wave," Construction Economics and Building, vol. 21, no. 3, pp. 11-32, 2021.

B. A. Tayeh, K. A. Al-Hallaq, W. S. Alaloul and A. R. Kuhail, "Factors affecting the success of construction projects in Gaza strip," Open Civil Engineering Journal, vol. 12, no. 1, pp. 301-315, 2018.

I. Maradzano, R. A. Dondofema and S. Matope, "Application of lean principles in the south african construction industry," South African Journal of Industrial Engineerin, vol. 30, no. 3, pp. 210-223, 2019.

M. G. Mandujano, C. Mourgues, L. F. Alarcón and J. C. Kunz, "Modeling Virtual Design and Construction Implementation Strategies Considering Lean Management Impacts," Computer-Aided Civil and Infrastructure Engineering, vol. 32, no. 11, pp. 930-951, 2017.

J. A. Gambatese, C. Pestana and W. L. Hyun, "Alignment between Lean Principles and Practices," Journal of Construction Engineering and Management, vol. 143, no. 1, 2017.

M. Marzouk, A. Elmaraghy and H. Voordijk, "Lean Deconstruction Approach for Buildings Demolition Processes using BIM," Lean Construction Journal (LCJ), pp. 147-173, 2019.

S. A. Albliwi, F. J. Antony, N. Arshed and A. Ghadge, "Implementation of lean six sigma in Saudi Arabian organisations: Findings from a survey," International Journal of Quality & Reliability Management, vol. 34, no. 4, pp. 508-529, 2017.

S. Demirkesen, E. Sadikoglu and E. Jayamanne, "Assessing psychological safety in lean construction projects in the united states," Construction Economics and Building, vol. 21, no. 3, pp. 159-175, 2021.